Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To deploy on-prem hosts using

Include Page
BloxOneCloud:VM Hypervisor (Hyper-V
or KVM, complete the following:

Note
titleNote

Infoblox recommends that you use Docker version 17.08 to avoid an issue in which the Docker container might re-deploy continuously, resulting in multiple deployments of the on-prem host. In addition, Kubernetes is not supported.

...

Download the Infoblox Docker image tar file, and then execute the following command at root:

Note
titleNote

You must have root privileges to execute Docker commands. Otherwise, you might encounter error messages while executing the commands.

# docker load -i <ActiveTrust_DFP_Docker_<VERSION>>.tar.gz
The system displays the download process. The following is a sample display:
7cbcbac42c44: Loading layer [====================================>] 5.05 MB/5.05 MB
d6f064e063f6: Loading layer [====================================>] 2.218 MB/2.218 MB
f77e7ee6f8c6: Loading layer [====================================>] 69.11 MB/69.11 MB
fa005789404e: Loading layer [====================================>] 4.096 kB/4.096 kB
4024a9f13d19: Loading layer [====================================>] 12.05 MB/12.05 MB
70fdf570286f: Loading layer [====================================>] 4.608 kB/4.608 kB
e8b22bfeae7a: Loading layer [====================================>] 4.608 kB/4.608 kB
6fabe6521295: Loading layer [====================================>] 4.608 kB/4.608 kB
5f70bf18a086: Loading layer [====================================>] 1.024 kB/1.024 kB
Loaded image: infobloxcto/onprem.agent:x.x.xx

...

# docker images

REPOSITORY                   TAG       IMAGE ID        CREATED         SIZE
infobloxcto/onprem.agent    0.1.xx    68f5ed0a1645    20 hours ago    87.81 MB

On the docker system, execute the following command:

No Format
sudo docker run -d \
  --name blox.noa \
  --network=host \
  -v /var/run/docker.sock:/var/run/docker.sock \
  -v /var/lib/infoblox/certs:/var/lib/infoblox/certs \
  -v /etc/onprem.d/:/etc/onprem.d/ \
  infobloxcto/onprem.agent:<VERSION> \
  --jointoken $JOIN_TOKEN
Note
titleNote

You must use “blox.noa” as the container name. Do not change this. You can capture the onprem.agent Version in the “Loaded image” field when you download the Infoblox Docker image. Note that only Docker image 3.1.11 or greater supports the join token option.

...

and KVM) Docker Deployment
BloxOneCloud:VM Hypervisor (Hyper-V and KVM) Docker Deployment