Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

    • Applications & Services: You can view the licenses and enable or disable services that are applicable to the host.
      • LICENSESSERVICE: This section column lists the licenses for the host. You cannot modify this.SERVICES: This section lists the services associated with the host and their current states. You can use the service slider to enable or disable the serviceapplicable services. All services are disabled by default when you initially deploy the host.
      • LICENSE: This column lists the licenses for the host. You cannot modify this.
      • STATE: This column lists the current state of the service. this can be Enabled or Disabled.
    • IP Interface Settings: This section lists the following information for the network interface of the on-prem host, if applicable. Note that you can add or make changes to this section only for the physical appliance. If your deployment is a bare-metal or OVA deployment, you cannot add or modify any IP interface settings.
      • NETWORK INTERFACE: The name of the Ethernet port on the appliance, such as enp1s0 or enp2s0.
      • NETWORK MODE: Displays what the interface is being used for, such as dhcp or static.
      • IP ADDRESS: The IP address associated with the interface.
      • CIDR/NETMASK: The netmask for the IP address.
      • DEFAULT GATEWAY: The default gateway for the interface.
    • DNS Local Resolver IP Settings: This section displays the IP addresses of the local DNS resolver. You can also add a new resolver or delete an existing one.
    • NTP Settings: This section displays the NTP server that your on-prem host is currently using. You can add a new one or delete an existing one. Note that you can add or make changes to this section only for the physical appliance. If your deployment is a bare-metal or OVA deployment, you cannot add or modify any NTP settings.
    • Proxy Settings: This section displays the URL of the HTTPS proxy for the on-prem host if configured. You can specify the path for the CA certificate that BloxOne Threat Defense Cloud should use to authenticate the proxy. Note that the proxy setting is for web connection authentication only.
    • Docker Bridge Settings: This section displays the IP addresses of the Docker Bridge that are associated with the on-prem host. You can add new IP addresses or remove existing ones only for physical appliances. If all IP addresses are disabled, the Docker Bridge will default to 172.17.0.0/24.

      Note
      titleNote

      You can use an IP address for the Docker Bridge in a network no larger than a /24 subnet.

  1. Click Save & Close.

...